9
7.3
Display main screen
Legend:
1.
„Salon” - control panel name. It is also a
name of the compartment in which the
panel is located. Default name in “Panel
1”. This name should be changed in
menu
→
basic settings
→
change panel
name
2.
Holiday mode – symbol concerning
running holiday mode. Mode can be
programmed in menu
→
basic settings.
This symbol is displayed automatically.
3.
Arrow for changing screen – press this
arrow in order to switch to HUW
preparation screen or separate heating
circuit screen if any additional functions
are active.
4.
Important information – graphical
symbol appears in case of important
information
for
user
occurs,
e.g.
information
concerning
temperature
sensor damage.
5.
Enter MENU button
6.
Symbol of active heat source – this
symbol indicates that the boiler is active.
7.
Heating mode symbol – possible
options: day and night.
8.
Preset room temperature – it is set
separately for day and night mode. Press
this symbol in order to edit the preset
room temperature.
9.
Navigation bar – indicates location of
displayed screen and number of screens
possible to be displayed. Screens can be
changed with the use of (3) and (11)
arrows.
10.
Temperature measured by external
temperature sensor
11.
Arrow for changing screens – press
this symbol in order to switch to HUW
preparation screen or separate heating
circuit screen if any additional functions
are active.
12.
Date and hour
13.
Parental lock symbol – lock can be
deactivated in menu
→
basic settings.
14.
Current work mode symbol – press
this symbol in order to go to work mode
selection.
15.
Measured room temperature – by
room temperature sensor located in the
control panel.
Summary of Contents for ecoMAX920P2-I
