Be wise, plug in.
Stealth installation
Verify the installation
You can verify the installation without the need of WiFi/ LAN:
Make sure you have installed the Stealth and Stretch 2.0.
Remember, the Stretch 2.0 must not be connected to LAN!
1. Connect the adapter with the Stretch 2.0 and the wall socket. The Stretch
2.0 will start in WiFi access point mode.
2. Connect your smartphone (installer) with the network of the Stretch via
the WiFi access point.
Password: The Stretch ID (see sticker)
3. Go to : http://192.168.40.40 via the mobile browser on your smartphone.
The Stretch 2.0 web interface starts loading and continues generating a
new appliance for the installed module.
Username: stretch
Password: The Stretch ID (see sticker)
4. In case of energy production (solar panel):
You will notice below the image of the Stealth in the green field (and
the MAC adress) a negative sign (-) in front of the solar production if
the installation has been executed correctly (and if the solar panels
are producing energy). This may take some time. If the installation is
connected incorrectly there will be no negative sign (-) in front of the
power output.
In case of energy consumption (appliance):
If the installation has been executed correctly there will be no negative
sign (-) in front of the power output.
