Plockmatic SQF-200 SquareFolder, Service Manual

Page: 18 / 85

SQF-3-9
Replacement
Adjustment
29 November 2006
Removal
1. Tilt machine ( 3.1.6).
2. Remove R-pin [A] ( x 1).
3. Remove sprocket [B].
4. Disconnect the motor connectors ( x 2) .
5. Remove screws [C] ( x 4).
6. Remove Motor.
Replacement
1. Reinstall the motor, and secure it by tighten screws [C] ( x 4).
2. Connect the motor connectors ( x 2) .
NOTE: The Orange wire on ”+”, and the Violet wire on ”-”.
3. Reverse the rest of the removal procedure.
3.2 MOTORS
3.2.1 TRANSPORT BELT MOTOR (M1)
MOTORS
M1
[C]
[A] [B]