HCI3500
07 June 2018
1. Installation Procedure
1-8
1.2
HCI3500 Installation, Continued
C
D
4. Using the spanner, adjust wheel height as shown [C]. Measure the
distance between the machine and the floor. As a rule of thumb, meas
-
ured distance [D] should be equal to 100 mm at all four corners of the
machine.
NOTE: the distance [D] might be different depending on system con-
figuration (e.g. whether the upstream device has a decurler or not) and
on floor characteristics.
5. Place a spirit level on the paper path of the HCI3500 and raise/lower
the casters until the machine is leveled.
1.2.5
Adjust Machine Height
1. Open front door
2. Reach in and pull green tab [A] up in order to open both trays
3. Locate the spanner [B] (behind cover of lower tray)
A
B
