manualshive.com logo in svg

Plockmatic 45, Operator'S Manual

Share
Download
Plockmatic 45 Operator'S Manual Download Page 23

T10113

Mar 2000

5.1 Cleaning the water tray, continues

Mailer/inserter Model 45 Operator Manual

5-2

correct position

water tray

guide plate

incorrectly positioned
guide plate

5.2 Cleaning the envelope sealing flap

The envelope sealing flap (stainless steel) and a guide
plate (stainless steel) under it, aswell as the painted
plate under the two leftmost rollers will eventually need
cleaning due to glue build-up.

•

Clean the envelope sealing flap and the guide plate
by lifting app. 10mm at the green dot. To facilitate
cleaning, the rightmost roller can be removed. Press
down the envelope sealing flap and remove the roller
by pushing it to the rear (1) and lifting the front end (2).

•

Clean the painted plate under the rollers. If neces-
sary remove the painted plate by lifting the rightmost
edge as shown in figure (and same place opposite
side). Close the envelope feeding table and pull the
plate out towards the receiving tray.

envelope
sealing flap

lift painted
plate here

1

2

Summary of Contents for 45
































Reviews:

No comments

Brands by name

Popular brands

Load more brands