9
PHONO PREAMPLIFIER
Installation & Operation
WARNING: RISK OF ELECTRIC SHOCK. TERMINALS MARKED WITH
SHOULD BE CONSIDERED HAZARDOUS LIVE AT ALL TIMES.
This preamplifier operates at hazardous voltage levels. We recommend that any work
requiring removal of the lid be referred to a suitably qualified and experienced service
technician. DO NOT place this phono preamplifier in any position where liquids or any
foreign material may accidentally enter it.
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL
FOR CORRECT PLACEMENT & OPERATION OF THIS PRODUCT.
CONNECTIONS
Connections to your Plinius Koru Phono Preamplifi er should be made in the same
order as they are listed in this section. DO NOT attempt to connect your Koru Phono
Preamplifi er until you have read and fully understood these instructions. Although these
instructions refer to the connection of the Plinius Koru to a preamplifi er, the Koru can also
be safely installed into multimedia systems by following the same installation guidelines.
Should you require any further assistance, please contact your Plinius dealer.
PHONO TURNTABLE INPUTS
Connect your Turntable to the input on the back the Plinius Koru using suitable
single-ended RCA interconnect cables only. Make sure you connect the red coded
cable to the red RIGHT RCA input, and the black (or white) cable to the white LEFT
RCA input. Also make sure the RCA connectors are a snug fit and inserted all the way
in. If your phono turntable has an earth cable, this can be connected to the GROUND
post next to the input terminals.
OUTPUT TERMINALS
The connection of the outputs of the Koru Phono Preamplifier must be made by an
‘instructed person’ or by suitable ready made interconnect cables only.
Connections for preamplifiers are provided at the rear of the unit. If using single-
ended RCA outputs connect your Koru to the ‘line level’ RCA inputs on the back of
TURNTABLE OUTPUT
KORU INPUT
