8
PLINIUS KORU
4. EARTH POST
This is a chassis connected gold-plated earth post for use with most vinyl turntables.
5. OUTPUT TERMINALS
Connections for line level preamplifiers are provided in the centre of the rear panel.
Connections are available for both single ended RCA and balanced XLR cables.
The XLR output pin configuration used in all Plinius product is:
PIN 1 to GND
PIN 2 to +Signal
PIN 3 to –Signal
NOTE: Because of the way balanced XLR outputs are configured it is not possible to
connect both XLR and RCA at the same time.
6. MAINS SWITCH
The heavy-duty rocker switch on the right of the panel diagram turns the Mains/
Line Power to the preamplifier ON or OFF. For your safety, this switch should remain
accessible at all times in case of an emergency.
7. MAINS POWER CORD IEC CONNECTOR
This connector is where the mains supply cable from your wall connects to the
preamplifier. You will notice that a fuse holder is mounted within this connection, and
it holds a mains fuse to provide surge and overload protection for your preamplifier.
