Plextor PlexWriter 48/24/48U, Installation And User Manual

Page: 16 / 48

Section 2. Connecting Your PlexWriter
10
PlexWriter 48/24/48U Installation and Users Manual
Connect the PlexWriter Drive
Before proceeding to install the PlexWriter drive on your personal computer, record
the serial number.
Record the Serial Number and TLA Code
Record the serial number and TLA number of your drive on the inside front cover of
this manual.
Install in Windows XP, Windows 2000 or Windows Me
If you have a computer with Windows XP, Windows 2000 or Windows Me, use the
following procedure to install your PlexWriter USB drive:
1. Turn ON your computer system.
2. Connect the AC adapter to your PlexWriter as shown in Figure 4.
3. Turn the PlexWriter’s power switch ON (the “1” is depressed).
4. Connect the USB cable from your PlexWriter 48/24/48U drive to the computer.
Figure 4. Connecting the AC Adapter and USB Cable
The drive is automatically recognized by the computer.
NOTE : If you cannot connect the USB cable to the PlexWriter, make sure the self-test
switch cover is to the left, covering the self-test switch.