Plextor Plextalk PTR1, User Manual

Page: 51 / 223

Section 5, Getting Started
-30-
By pressing this dial, you can change between controlling play speed and tone.
You can select play speed in 11 stages, from –2 to +8. (–2 is half speed, +4 is
double speed and +8 is triple speed.)
5.2.9 Change the audio tone
Procedure Voice Guide Visual Guide
Press the Play Speed/Tone Dial is
located second from left on the front
of the unit.
“~Tones~”
“Tone Normal” ―
To increase the speed, turn the Play
Speed/Tone Dial to the right, located
second from left on the front of the
unit.
“~Tones~”
“Tone +1” ―
To decrease, turn the Play
Speed/Tone Dial to the left, located
second from left on the front of the
unit.
“~Tones~”
“Tone Normal” ―
You can adjust the tone in 13 stages: from -6 to +6. Turn the control to the right
to enhance higher frequency part and turn it to the left to enhance lower
frequency part.
Press the dial to the rear to alternate controlling play speed and controlling tone.
Check the speed and tone by listening to the voice guide, then make
adjustments as desired.