Plextor Plextalk PTR1, User Manual

Page: 167 / 223

Section 10, Using Other Plextalk Features
-146-
10.6.3 Record an alarm note
You can record a notepad note, then set a date and time for it to be played back
automatically. For instance, you can record it to signal you on August 31, 2002, at
10:00 a.m. (30 minutes before your appointment).
Procedure Voice Guide Visual Guide
Press the 5 key , select
Notepad
with the 4 or 6 key , then press
the 8 or # key .
“Menu”
“Notepad”
“Enter”
“Press 4 or 6 key to
select notepad, press 2
or 8 key to select index
level, press record key
to start recording.”
“Date: July 7, 2002”
“No index” ―
Press the Record key once.
Then speak into the microphone, and
adjust the recording level.
“Volume setting. Press
and hold record key
while recording”
“Input Build-in
Microphone”
“Good”
Recording
LED flashes
Recording
Level LED
Press and hold the Record key
and record the note; for example,
“Wake up! Meet Ms. Kool in 30
minutes, on August 31, 2002, at
10:30 am at the Frostline”.
Release your finger from the Record
Key when you are done.
“~ Recorded content ~”
“July 7, 2002”
“8:30 a.m.”
“Reminder: Off”
Recording
LED is lit
Press the # Key , select
Set date
with the 4 or 6 key , then press
the 8 or # key .
“Enter”
“Select notepad setting”
“Set date”
“Enter” ―
Select
Setting date
with the 4 or
6 key , then press the 8 or #
key .
“Select type of index”
“Setting date”
“Enter” ―
Press the 0 key , 8 key , 3 key
and 1 key , then press the #
Key .
“Setting date”
“Input date with 4 digits”
“0,8,3,1”
“Enter” ―