5
- To pause the recording, push the Record key again.
- To stop the recording, press the Play/Stop key.
- Recorded titles are grouped into a category called "Recordings".
To create a voice memo (max 1 minute for one voice memo)
- Hold the Record key and speak into the microphone. Voice memos are saved in the internal memory of the
PLEXTALK Pocket.
To make a backup from source media to target media
- Connect the source media and target media with the PLEXTALK Pocket.
- Select the title to backup on the source media.
- Press the 9 key to start the backup. Follow the audio instructions.
To connect to USB device
- Plug in smaller connection of USB cable(short) to the PLEXTALK Pocket.
- Plug in USB memory to larger connection of USB cable.
- Connect USB device using USB cable supplied with USB device.
To connect to computer
- Connect small connection of USB cable(long) to the PLEXTALK Pocket.
- Connect larger connection to a computer. Data can be transferred from computer.
To configure and connect wireless network
- Press the Menu key and select "Network settings".
- Select "Wireless network settings" and then select "Available wireless network".
- PLEXTALK Pocket announces available wireless networks. Press the Left or Right key to select the wireless
network whose setting you want to configure, and then press the Enter key.
- There are series of settings such as security setting and so on. Follow the audio instructions.
- When you have finished configuring, PLEXTALK Pocket tries to connect this wireless network.
To register podcast feeds using the "PLEXTALK Transfer Software"
- Install the "PLEXTALK Transfer Software".
- Run the "PLEXTALK Transfer Software" and connect the PLEXTALK Pocket to your computer.
- Select "Podcast Feed Manager" on the "Content type" drop down box.
- Go to "File" on the Menu and select "New Podcast Feed".
- Enter the URL of the podcast feed and press "OK" button.
- After registering podcast feeds, remove the PLEXTALK Pocket from your computer.
