13-8. Touch Calibration
Selecting this menu to increase accuracy of the touch screen.
For touch setting, press the center of the cross symbol. Then, the cross symbol will appear at the
center, left upper side, left bottom side, right bottom side and right upper side one by one. To
complete touch setting, press the center of the cross symbol for 5 times in total.
13-9. OK
You can save all settings by pressing this button
13-10. Cancel
You can cancel all settings you made by pressing this button.
13-11. INIT
The factory default setting will be stored, if you press this button.
61
Using VXA-3000
VXA-3000
Basic Operation
Caution
If you press the point that is far away from the cross symbol at the time of touch setting, the cross
symbol will appear indefinitely. Therefore, stop the car without fail for touch setting. Do not use the tool with too
sharp tip, since it can damage the touch panel. Instead, use the round edge object like a test jack for setting.
