Plebani Snack 072, Assembly And Use Instructions

Page: 6 / 18

ASSEMBLY AND USE INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
QUALITY GUARANTY:
- Our high chair is made according to the European standards EN 14988 : 2006.
-
.
This product is guaranteed for a period as stated by the laws in force.
- All the defects and deteriorations caused by the wrong use, by the non respect of the
standards of security, by the non respect of the mentioned assembly and use instructions or
by modifications made on the item can't be claimed.
- The natural wear of time and damages caused by improper or wrong use can't be claimed.
- Scratches, wear of time, opacity or the turning yellow of the parts caused by the rubbing, by
the improper use of detergents, sweat or atmospheric phenomena cannot be considered as
manufacturing defects.
- Wrong washing and not dry fabrics can create molds and cannot be considered as
manufacturing defects
IMPORTANT!:
BEFORE USE THIS ITEM, READ CAREFULLY INSTRUCTIONS AND
ASSEMBLING SEQUENCE TO AVOID USELESS DANGER TO YOUR BABY!
THROW AWAY AND KEEP OUT OF BABY'S REACH THE POLY BAGS OF THE
PACKING, THEY MIGHT BE RISKS OF SUFFOCATION!
NEVER LEAVE YOUR CHILD UNATTENDED!
EN
6
ASSEMBLING:
1° : After remove and thrown away the plastic bags of packaging, press and hold the red
buttons on back legs and push down (Fig. 1) to open structure completely.
2° : Insert the plastic bases on the tubes and fix with screws (Fig. 2).
3° : Bring the seat and fasten it on its support by entering red hinges in the slots (Fig. 3).
Slide the metallic drawn from side to side and lock it with its cap with spring (Fig. 4).
4° : Fix the two anti-slide feet by pressure into holes of FRONT base pushing them right
to the end and insert the wheels with brake into REAR basis pushing them right to the end
(Fig. 5).
5° : To fix footrest, match the slots with pins, push it right to the end and fix with the two
screws (Fig. 6). Make sure of correct assembly by pulling it lightly towards you.
Footrest is adjustable in different heights. To raise, simply lift it, to recline it, press
simultaneously the two red levers and push down.
6° : To fix storage basket, see Fig.7 and Fig. 8.
7° : To fix the tray, pull and hold the handle under it, and slide it onto the rails of the arms
(Fig. 9). Push until the end and leave handle. Tray is adjustable in three positions, pull
handle to unlock it and select the correct position.
Now your high chair is assembled and ready to use.
Your “Snack” high chair is provided of second tray used to protect the lower one. To
remove tray, lift the tab and lift it. To reattach it, push it right to the end.
Tray can be removed and hang up to red bottoms on rear tubes (Fig. 10).