45
GENERATOR RUN LIMITS:
This screen will enable you to set the parameters for run time
for the air conditioner settings. Once the air conditioner has
brought the coach down to the chosen temperature and cycled
off the generator should continue to run for ten minutes. It will
also allow you to set the maximum run time for the generator.
STOPPING CONDITIONS FOR LOW BATTERY:
This screen will enable you to set the parameters for the
battery charging system. You will be able to set the desired
charge voltage as well as the amount of time that the battery
has held the voltage before the generator will shut down.
Change the settings by touching the + and – buttons.
Touch the NEXT button to move to the next screen.
QUIET TIME SETTINGS:
Touch the box in the right hand corner to enable or disable
quiet time settings. Quiet time settings allow you to
determine when the generator will not be allowed to run.
Select the box above the FINISH button to enable or disable
a battery top up just before the system goes into quiet time
settings.
Touch FINISH to complete the programing for easy set up.
Touch
MANUAL SETUP
for a more in depth set up choice.
START TRIGGERS:
Touch low Battery Voltage or HVAC loads to turn on the
required triggers for auto gen start. The button will be in light
blue when it is turned on.
Select
QUIET TIME
to set the parameters for the quite time
settings. Change the settings by touching the + and – buttons.
STARTING:
Change the settings of battery voltage, delay if the generator
fails to start and number of restart tries.
RUNNING:
Set the parameters for run time of the generator. This applies
the HVAC setting.
STOPPING:
Set the voltage parameters and the amount of time the battery
remains at that voltage before the generator will shut off. This
applies to the low battery voltage setting.
If both the LOW BATTERY VOLTAGE and the HVAC LOADS are
activated which ever one needs the most run time to acquire
the desired result will override the other setting.
