44
AUTOMATIC GENERATOR START
The automatic generator start can be used to charge the
coach batteries and/or for climate control in your coach.
NOTE:
To operate the generator on the Plateau the
propane switch must be ON.
WARNING:
Do not use the automatic generator start if you
are plugged into shore power or if you are in an area where
running the generator is prohibited.
Select the AGS button to enable the AUTO GEN START
function. A display will appear with warning and instructions.
AUTO GEN START will not engage if you do not cycle the
ignition to the run position within the allotted time or if you
select CANCEL on the screen. The ignition should only remain
in the run position for less than 10 seconds otherwise the
AUTO GEN START will be disabled.
NOTE:
When automatic generator start is used for the
HVAC system (air conditioning or heating), the appliance
must be selected on the main screen, the temperature
must be selected and set on the main screen and the fan
on the main screen should be set to FAN AUTO.
Select the SETTINGS button to set the parameters for AUTO
GEN START. Once you select the setting button you will have
a choice between EASY SETUP or MANUAL SETUP.
Select the setup method you want to use.
Select
EASY SET UP
for a quick set up of the start
parameters.
STARTING THE GENERATOR:
The first screen displayed will ask when you want the
generator to auto start. Select the boxes to check or uncheck
the reason to enable.
Select the NEXT button to move to the next screen.
STARTING CONDITIONS FOR LOW BATTERY:
This screen will enable you to set the voltage and the period
of time below that voltage, where you want your generator
to start. The generator when running, will charge the coach
batteries through the inverter/charger.
Change the settings by selecting the + and – buttons.
Select the NEXT button to move to the next screen.
