Pleasure-Way ONTOUR 2.2 2021.5, Owner'S Manual

Page: 58 / 68

46
12 VOLT OR DC OPERATION
1. Turn the inverter ON. Ensure the TV and Blu-ray player are
plugged into the wall outlet located above the Blu-ray player
in the cabinet.
2. Turn the antenna booster ON by pressing the black button
on the antenna booster. Press the search button.
3. Turn the TV ON and select DTV-TV using the input button on
your TV or remote.
4. Press the SETTINGS button (gear symbol) > All Settings >
Channels > Channel Tuning > Auto Tuning to bring in all local
air channels.
5. For Cable TV connect a cable extension cord from the cable
hookup in the component compartment to the park cable
outlet. Turn the TV antenna booster off. Follow step (4) for
auto programming.
6. For Blu-ray operation, turn ON the Blu-ray player. Using the
source button on the TV or TV remote, select HDMI 1. Insert
a DVD or Blu-ray disc and allow the disc to load and press
play.
FOR 120 VOLT OR A/C OPERATION
When using a generator or shore power, the inverter will switch to
grid mode. Use the same programming procedures as the 12 volt
operation.
TABLE
The Lagun Table leg system is constructed of heavy anodized
aluminum, and swivels 360 degrees.
1. Remove the table and leg from behind the driver seat.
2. Remove the table leg from the base of the table by loosening
off the black locking handle.
3. Slide the leg into the leg support located on the passenger
side ottoman and tighten the locking handle.
4. Press the table top onto the leg and tighten the locking
handle.
5. You can now adjust the table to the desired height and
location, ensuring the locking handles are locked in place
while the table is in use.
WARNING: Ensure Lagun table is stored or locked into travel
position when driving.
NOTE: To save power while watching TV ensure the Blu-ray
player is switched OFF. Only turn your Blu-ray player on when in
use.
NOTE: Turn ON the inverter. The inverter will be used if you are
not plugged into shore power.