pleasant hearth VL-AA18D Quick Start Manual Download Page 5

4

SAFETY INFORMATION

1. This appliance is only for use with the type of gas indicated on the rating plate.
2. 

Do not place propane/LP supply tank(s) inside any structure. Locate propane/LP supply tank(s) outdoors.

3. If you smell gas
• shut off gas supply
• do not try to light any appliance

• do not touch any electrical switch; do not use any phone in your building

• immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions

• if you cannot reach your gas supplier, call the fire department

4. This log set shall not be installed in a bedroom or bathroom.

5. Do not use this log set as a wood-burning log set. Use only the logs provided with the log set.

6. Do not add extra logs or ornaments such as pine cones, vermiculite or rock wool. Using these 

added items can cause sooting. 

7. This log set is designed to be smokeless. If logs ever appear to smoke, turn off log set and call a 

qualified service person. Note: During initial operation, slight smoking could occur due to log curing 

and log set burning manufacturing residues.

8. To prevent the creation of soot, follow the instructions in Cleaning and Maintenance, page 17-18.

9. Before using furniture polish, wax, carpet cleaner or similar products, turn log set off. If heated, 

the vapors from these products may create a white powder residue within burner box or on adjacent 

walls or furniture.
10. This log set needs fresh air ventilation to run properly. 
11. Do not run log set

• where flammable liquids or vapors are used or stored.

• under dusty conditions.

12. Do not use this log set to cook food or burn paper or other objects.

13. Never place any objects in the fireplace or the logs.

14. Do not use log set if any part has been under water. Immediately call a qualified service technician to 

inspect the log set and to replace any part of the control system and any gas control which has been 

under water.

15. Turn off and unplug log set and let cool before servicing. Only a qualified service person should 

service and repair log set.

QUALIFIED INSTALLING AGENCY

Only a qualified agency should install and 

replace gas piping, gas utilization equip

-

ment or accessories, and repair and equip

-

ment servicing. The term "qualified agency" 

means any individual, firm, corporation, or 

company that either in person or through a 
representative is engaged in and is respon-

sible for:

a) Installing, testing, or replacing gas piping or

b)Connecting, installing, testing, repairing, or 

servicing equipment; that is experienced in 

such work; that is familiar with all precautions 

required; and that has complied with all the re

-

quirements of the authority having jurisdiction.

Summary of Contents for VL-AA18D











Reviews: