background image

2

WARNING: Read the Installation & Operating Instructions before using this appliance.  
IMPORTANT: Read all instructions and warnings carefully before starting installation. 

Failure to follow these instructions may result in possible injury to persons or a fire 

hazard and will void the warranty.

TABLE OF CONTENTS

SERVICE HINTS

When Gas Pressure Is Too Low

• pilot will not stay lit

• burners will have delayed ignition

• heater will not produce specified heat

• for propane/LP units, propane/LP gas supply may be low

You may feel your gas pressure is too low. If so, contact your local natural or propane/LP gas supplier.

Specifications

 ...................................................................................................................................2

Important Safety Information ............................................................................................................3

Product Identification

 ........................................................................................................................ 5

Product Features .............................................................................................................................. 6 

Preparing for Installation................................................................................................................... 7

Installation ......................................................................................................................................10

Unpacking.......................................................................................................................................15

Log Assembly .................................................................................................................................21

Operation ........................................................................................................................................22

Care and Maintenance ................................................................................................................... 25

Troubleshooting ..............................................................................................................................27

Replacement Parts ......................................................................................................................... 30

Warranty .........................................................................................................................................31

ITEM

VFL2-SO18DT

VFL2-EO18DT

VFL2-WW18DT

VFL2-SO24DT

VFL2-EO24DT

VFL2-WW24DT

Input Rating

30,000 BTU/Hr

30,000 BTU/Hr

Minimum Input Rating

15,000 BTU/Hr

24,000 BTU/Hr

15,000 BTU/Hr

24,000 BTU/Hr

Gas Type

Natural

LP/Propane

Natural

LP/Propane

Ignition

Electronic Push 

Button

Electronic Push 

Button

Electronic Push 

Button

Electronic Push But-

ton

Manifold Pressure

5 in. W.C. 

10 in. W.C.

5 in. W.C. 

10 in. W.C.

Inlet Gas Pressure *For purposes of input adjustment
Maximum

14 in. W.C.

14 in. W.C.

14 in. W.C.

14 in. W.C.

Minimum*

6 in. W.C.

11 in. W.C.

6 in. W.C.

11 in. W.C.

Summary of Contents for VFL2-EO18DT













Reviews: