
8
Battery warning notices!
• Remove the batteries when they are flat, or
if the product is not in use for an extended
period.
• Do not use different types or brands of battery
or new and used batteries together or batter-
ies with different capacities as these can leak
and cause damage.
• Ensure the polarity (+/-) is correct when insert-
ing the batteries.
• Replace all batteries at the same time and
dispose of the old batteries as prescribed.
• Warning! Batteries must not be charged or re-
activated by other means, taken apart, thrown
into fire or short-circuited.
• Always keep batteries out of reach of children.
• Do not use rechargeable batteries!
• Cleaning and maintenance must not be car-
ried out by children without supervision.
• Clean the battery and device contacts as
needed and before inserting.
• Do not expose the batteries to extreme condi-
tions (e.g. radiators or direct sunlight). Other-
wise there is an increased risk of leakage.
• Batteries can be life-threatening if swallowed.
Therefore, store batteries in a place inac-
cessible to small children. Medical attention
must be sought immediately if a battery is
swallowed.
Danger!
• Handle damaged or leaking batteries with ex-
treme caution and dispose of them properly as
soon as possible. Wear gloves when doing so.
• If you come into contact with battery acid,
wash the affected area with soap and water. If
battery acid gets in your eye, rinse it with water
and seek medical attention immediately!
• The connection terminals must not be short-cir-
cuited.
Inserting the batteries
(Fig. B)/(Fig. E)
WARNING! Observe the following
instructions to avoid mechanical and
electrical damage.
Before using the safari vehicle (7) and the
volcano (3) for the first time, insert the batteries
provided (17).
1. Use a suitable screwdriver (not included in the
package contents) to loosen the screw (7a)/
(3a) of the battery compartment cover of the
safari vehicle (7) or the volcano (3).
Note:
make sure that the screw is kept safely
away from children and does not get lost.
2. Remove the battery compartment cover (7b)/
(3b) and carefully insert the respective batter-
ies (17) into the battery compartment (7c)/
(3c). The batteries must be inserted fully into
the battery compartment.
Note:
check the plus/minus poles of the batter-
ies and insert them correctly.
3. Screw the battery compartment cover back
onto the safari vehicle (7) and the volca-
no (3).
Replacing batteries
WARNING! Observe the following
instructions to avoid mechanical and
electrical damage.
When the batteries are flat, replace them as
described in the insertion instructions. Remove
the batteries from the product before inserting
new ones.
Replacing the sound track
battery (Fig. D)
Replace the batteries inside the product when
they are flat.
1. Use a suitable screwdriver (not included in the
package contents) to loosen the screw (4b)
of the battery compartment cover (4c) on the
underside of the sound track (4).
2. Remove the battery compartment cover and
carefully insert a new battery into the battery
compartment (4d). The battery must be com-
pletely fitted into the battery compartment.
Note:
pay attention to the plus/minus poles on
the battery and insert the battery accordingly.
3. Screw the battery compartment cover back
on.
GB
Summary of Contents for 359780 2101
