8
Clamp the battery charger
cable into the holder of the
flap (1n) and close the flap.
4. After charging disconnect the
battery charger cable (1m)
from the Mini RC Racer (2).
Clamp the battery charger
cable into the holder of the
flap (1n) and close the flap.
Using the product
Preparation
• Hold down the button (1i)
and push the Mini RC Racer
(2) backwards to free the ve-
hicle from the holding device
(1e) (fig. E).
• Screw the antenna (3) into
the antenna socket (1d)
on the remote control (1)
and pull the antenna out
completely (fig. G).
• There are small traffic cones
(4) in the lid of the box. Press
the lever down and take the
traffic cones out (fig. K).
Switching the product
on and off
• To control the Mini RC Racer
(2) with the remote control
(1) the Mini RC Racer must
be switched on.
To switch the Mini RC
Racer on or off slide the
switch (2c) on the bottom of
the vehicle to ON to switch
it on or to OFF to switch it off
(fig. F).
• When the product is not
being used the Mini RC Racer
(2) must be switched off. To
do this slide the switch (2c) to
OFF.
Operating the Mini-RC
Racer
The vehicle can be steered in
various directions using the
remote control (1). To do this
press the following buttons or
combinations of buttons. The
signal light (1h) lights up.
• Arrow pointing forwards (1c):
Vehicle moves forwards (fig. L).
• Arrow pointing backwards
(1g): Vehicle moves back-
wards (fig. M)
• Arrow pointing forwards (1c)
+ Arrow pointing to the right
(1f): Vehicle turns to the right
(fig. N).
GB