7
Full conformity declarations
are available under: http://
www.conformity.delta-sport.
com
Date of manufacture
(month/year): 10/2018
Replacing batteries
WARNING! Follow these
instructions to avoid
mechanical and electrical
damage.
The product comes with two
batteries whose protective foil
(1a) must be removed before
first use (fig. B). If the batteries
no longer work you can
replace them.
1. Open the cover (1b) of the
battery compartment on the
bottom of the remote control
(1) in the direction of the ar-
row and remove the cover
(fig. D).
2. Take out the batteries inside
the product.
3. Insert the new batteries care-
fully into the battery holder
(1l). The batteries must fit fully
into the battery holder.
Note:
Pay attention to correct
plus/minus polarity of the bat-
teries and their installation.
4. Slide the cover (1b) onto the
battery compartment on the
bottom of the remote control
(1) to close the battery
compartment.
Charging the battery
1. Open the flap (1n) on the
side of the remote control (1)
and take the battery charger
cable (1m) out of the holder
(fig. H).
2. Connect the battery charger
cable (1m) to the charging
socket (2b) on the Mini RC
Racer (fig. I).
3. Turn the switch (2c) to OFF
(fig. F).
Note:
The switch (2c) must
always be set at OFF when
charging. If not, the battery will
not charge.
Charging takes about 4
minutes. During charging the
charging control light (1j)
glows.
4. After charging disconnect the
battery charger cable (1m)
from the Mini RC Racer (2).
GB