ˎ
When removing the motion controller from the PlayStation
®
Move racing wheel,
never pull on the sphere. Always use the motion controller handle to pull the motion
controller free of the racing wheel lower holder.
Inserting the motion controller
Notice:
Do not attempt to insert the motion controller while a USB cable is attached.
1
Insert the motion controller through the upper
holder.
2
Firmly seat the motion controller into the lower
holder so the alignment pins fit into the mounting
holes, and the connector fits into the extension
connector in the motion controller.
When inserting the motion controller into the racing
wheel, hold the wrist strap aside so it does not interfere
with the physical and electrical connectors.
Using the PlayStation®Move racing wheel
1
Use both hands to operate the PlayStation®Move racing wheel.
2
To swivel the grips in or out:
• Push the release lever up or down until the grip moves freely.
• Adjust the grip to the desired position.
3
Refer to eu.playstation.com to see how the buttons on the racing wheel
relate to standard controls in compatible games.
Removing the motion controller
1
Grasp the handle of the motion controller first, then pull the motion
controller away from the alignment pins and the connector. DO NOT pull on
the sphere of the motion controller.
2
Remove the motion controller from the upper holder.
