3
SPIRAL TUBE SLIDE ASSEMBLY
Position the side walls and floor as shown.
(Fig. 1)
Note: The compression flanges of all three parts must
be facing up as shown.
Attach the side walls to the floor using
⁵₁₆
" x 1" hex bolts,
⁵₁₆
" washers and
⁵₁₆
" lock nuts as shown.
(Fig. 1)
Tighten firmly with a
¹
/
₂
" socket
and wrench but
do not over
tighten
.
Compression
Flanges
Attach the top bar to the side walls using
⁵₁₆
" x 1" hex bolts,
⁵₁₆
" washers and
⁵₁₆
" lock
nuts as shown.
Tighten firmly with a
¹
/
₂
" socket and wrench
but
do not over tighten
.
Items for
STEP 1:
(2) Side Walls
(1) Floor
(6)
⁵₁₆
" x 1" hex bolts
(12)
⁵₁₆
" washers
(6)
⁵₁₆
" lock nuts
Items for
STEP 2:
(1) Top Bar
(4)
⁵₁₆
" x 1" hex bolts
(8)
⁵₁₆
" washers
(4)
⁵₁₆
" lock nuts
Fig. 1
Before starting to assemble your Spiral Tube Slide, familiarize yourself with the contents.
Identify each component and hardware listed on Page 2. Hardware is shown actual size.
Crow’s Nest Assembly
