14
Locate the second bolt from the bottom on the 60º Tunnel
Assembly as shown. Remove and discard the bolt, save the
nut and the washers.
Attach the bracket to the slide using a
⁵₁₆
" x 1" hex bolt and
the washers and nut saved previously. The smaller flange of
the bracket will make contact with the bottom flange of the
slide as shown in the picture.
Tighten firmly but
do not over tighten
.
The larger flange of the bracket must make firm contact
with the 2" x 4" board of the playset as shown. Mark the
hole with a pencil.
Drill a
³₈
" hole through the 2" x 4" board.
Attach with
³₈
" x 2" hex bolt, a
³₈
" washer and a
³₈
" lock
nut as shown.
Note:
Inspect all the fasteners before children are
allowed to play on the Spiral Tube Slide.
2" x
4"
Items for
STEP 17:
(1) Support Bracket
(1)
³₈
" x 2" hex bolt
(1)
⁵₁₆
" x 1" hex bolt
(1)
³₈
" washer
(1)
³₈
" lock nut
2" x
4"
