(1) Air Rider
(4) Welded-Link Chains
(1) Swing Hanger
Assembly System
(1) Bracket System
Weather-Resistant
Hardware
Complete Illustrated
Instructions
CONTENTS TOOLS REQUIRED
HARDWARE INCLUDED (shown actual size)
3
/
8
" x 7" hex bolt
3
/
8
" flat washer
Socket Wrench and
Extension
⁹⁄₁₆
" Socket
⁹⁄₁₆
" or Adjustable
Wrench
Tape Measure
Safety Glasses
Drill
Air Rider Kit
Contains:
SWING HANGER ASSEMBLY
1. Position one bracket on the beam, at least 10" away from the
closest point of all other rides or stationary objects. Make sure
the alignment tab is flush with the bottom of the beam as shown.
Using the bracket as a guide, drill two
³⁄₈
" holes straight through
the beam. Install two
³⁄₈
" x 4" hex head bolts with washers through
the bracket and beam to hold the bracket in place.
(Fig. 1)
2. Slide the second bracket in place over the bolts. Install one
washer and lock nut on each bolt and tighten nuts (you
will need a socket extension for this step).
(Fig. 1)
Fig. 1
3
/
8
" x 4" hex bolt
3
/
8
" x 1
¹⁄₄
" hex bolt
(Swing Hanger Assembly)
3
/
8
" x 1" hex bolt
(Air Rider Assembly)
3
/
8
" lock nut
Bea
m
Square
Hammer
³⁄₈
" Drill Bit
Hack Saw
Metal File
Pencil
Ladder
2
⁹⁄₁₆
"
