6
·
Never install your refrigerator near heat source and direct sun
shins.
ELECTRICAL REQUIREMENT
WARNING:
DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTOR.
DO NOT USE EXTENSION CORD.
Failure to follow these instructions can result in
death, fire or electrical shock.
Before you move your
refrigerator
into its final
location, it is important to make sure you have the
proper electrical connection.
Recommended Earthing Method
A 220
～
240 Volt /50 Hz AC only 10 ampere fused and properly
earthed electrical supply is required. It is recommended that a
separate circuit serving only this appliance be provided. Use a
receptacle which cannot be turned off with a switch or pull
chain. Do not use an extension cord.
NOTE:
Before performing any type of installation, disconnect
the refrigerator from the electrical source. When you are
finished, connect the refrigerator to the electrical source and
reset the control to the desired setting.
LEVELING
If the refrigerator is not leveled during installation. The doors
may not close or seal properly, causing cooling, frost, or
moisture problems. It is very important of the refrigerator to be
level in order to function properly.
