5
·
Remove tape and any labels from your refrigerator before
using(except the rating label).
·
To remove any remaining tape or glue, rub the area briskly
with your thumb.
·
Tape or glue residue can also be easily removed by rubbing a
small amount of liquid dish soap over the adhesive with your
fingers. Wipe with warm water and dry.
·
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
·
When moving the refrigerator, do not tilt the refrigerator
beyond 45°from upright position.
CLEANING BEFORE USE
：
：
：
：
After you remove all of the packaging materials,
（
especially
the foam between outside condenser and cabinet should be
removed
）
clean the inside of your refrigerator before using it.
SPACE REQUIREMENTS
WARNING: Keep flammable materials and vapors, such as
gasoline, away form refrigerator.
Failure to do so can result in death, explosion, fine or
burns.
·
To ensure proper ventilation for your refrigerator, allow for
200mm space on each side between walls, 200mm space
between back of your refrigerator and the wall, and 300mm
space between counter top and the roof or ceiling.
·
If you are installing your refrigerator next to a fixed wall, leave
sufficient space on the hinge side to allow for the door to
swing open.
