manualshive.com logo in svg

PlaySafe 22-PS300S, Owner'S Manual And Assembly Instruction

Share
Download
PlaySafe 22-PS300S Owner'S Manual And Assembly Instruction Download Page 8

 

Step Illustration 

Instructions 

Hardware 

Reference 

1 

 

Secure the glider attachment with the V-
screw and the bolts at the squared portion 
of the top bar. 

NOTE:

  The glider must be positioned 

adjacent to the outside legs. 

Part Ref. #:  PSHW35, PSHW22  

 

  

 

2 

 

Attach the two vertical poles to the glider 
attachment.  Start by removing the 
hardware from the lower section of the 
glider attachment.  Align the vertical bar 
with the glider attachment and re-insert the 
hardware.  Repeat the process for the other 
side.  

NOTE: 

 The curved portion of the pole is 

the top and it should face the inside of the 
swing frame. 

Part Ref. #:  PSHW21, PSHW36 

  

  

 

3 

 

Connect the two horizontal poles (must 
first be disassembled from the seats) to the 
two vertical poles using the hardware 
provided.  Be sure that the plastic bushings 
are between the vertical poles and 
horizontal poles. 
 

Part Ref. #:  PSHW15, PSHW11 

 

  

 

4 

 

Reattach the seats onto the horizontal poles 
using the flat headed screw, washer, and 
lock nut.  
 

Part Ref. #:  PSHW1 

 

  

 

8 

 

 

 

 

 

 

                      

 

©

2006 Pacific Cycle, Inc.

 

 

Summary of Contents for 22-PS300S
















Reviews:

No comments

Brands by name

Popular brands

Load more brands