STEP 17: LADDER TO FORT
1: PLACE THE LADDER INTO POSITION ON THE RIGHT SIDE OF THE FORT AS SHOWN BELOW. USING THE LADDER
BRACKETS AS A TEMPLATE, DRILL A 3/8” HOLE THROUGH THE BOTTOM PANEL BOARD.
2: FROM THE UNDERSIDE OF THE DECK INSERT A T-NUT INTO THE BACKSIDE OF THE 3/8” HOLES ON THE BOTTOM
PANEL BOARD.
3: ATTACH THE LADDER WITH 5/16 X 1-1/2” HEX BOLTS AND 5/16” WASHERS.
4: WHEN THE BRACKETS ARE SECURE, AND THE LADDER IS IN ITS FINAL POSITION; TIGHTEN THE 5/16 X 1-1/2” BOLTS
ON THE LADDER SIDES.
THE 2 X 6 ON
BOTH SIDES.
HEX BOLT
INSERT A
T-NUT BEHIND
5/16" X 1-1/2"
5/16" WASHER
3/4"
RIGHT SIDE OF FORT
50
Summary of Contents for 1500AWC
