EMPTYING WATER FOR MAINTENANCE AND STORAGE
We have provided a maintenance hose to aid in emptying your Playlearn Bubble Wall.
Attach the water pipe to the nozzle closer to the handle on the manual pump and place
the other end of the pipe deep into the panel. Place a large bucket on the floor (or at a
lower point than the end of the pipe) and start pumping until the water starts flowing.
8
9
7
6
Test the product with the remote control (#9) or the app. Check that the
product is working properly.
Fill Bubble Wall with water until 2” from the top of the panel (#2).
PLEASE NOTE Jets can take up to 24 hours to reach their full operating
capacity. Please allow for this time for them to “break in”.
Place the lid (#1) onto the top of the Bubble Wall.
Return the trays (#4) to the base (#5) of the Bubble Wall. Fill the trays with
the decoration rocks (#3).
Place the customer support sticker on your Bubble Wall in case your need
to reach out to us at any time.
know
know
REMOTE
The remote operates the following way:
Power
Turns the product on and off
Play/Pause
Turns the light on and off
Brightness
Adjusts the brightness of the light
Colors
Changes the light to button color
Auto
Light will gradually change between all colors
Jump 3/Jump 7
Light will jump between red, green and blue /
Light will jump between all 7 colors
Fade 3/Fade 7
Light will fade between red, green and blue /
Light will fade between all 7 colors
Flash
Light will flash on and off
Speed +/-
Increases/decreases speed of the light changing
See next page for app insturctions.
10
Summary of Contents for Hello!
Page 1: ...Hello I am your new Standing Bubble Wall USER MANUAL...
Page 2: ......
