Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
ZIG ZAG STEEL NET WALL
Rev B
8/13/2010
1968
Page 3 of 3
R5 Parts List
Specifications
ZIG ZAG STEEL NET WALL:
Shall be fabricated from 2.375" O.D. 11 gauge
steel outer frame welded to 1.315" O.D. 11 gauge
steel rungs. 1/4" steel clevises will be welded to
frame. Zig Zag Steel Net Wall will have a multi-stage
baked-on powder coat finish.
MOUNTING BLOCKS:
Shall be two-part and precision die-cast from a high
strength aluminum alloy. The Mounting Blocks have
a multi-stage baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
R3.5 Parts List
Part #
DESCRIPTION
QTY.
FS-1968-R5
Zig Zag Steel Net Wall 90 R5
1
GF-7006-B
Mounting Block R5 Bottom
2
GF-7006-T
Mounting Block R5 Top
2
9143112-TR
Bolt Shoulder 3/8" x 2-1/2" BH
2
9281062-5-TR
Screw Soc HD CS 1/4" x 1-3/8" TR
2
9345002
Washer Flat SAE 1/2"
4
9443092-TR
Nut Barrel 3/8" x 2" BH
2
Part #
DESCRIPTION
QTY.
FS-1968-R35
Zig Zag Steel Net Wall 84 R3.5
1
GG-8110
Mounting Block 4 Top R3.5
2
GG-8111
Mounting Block 4 Bottom R3.5
2
9143112-TR
Bolt Shoulder 3/8" x 2-1/2" BH
2
9281062-5-TR
Screw Soc HD CS 1/4" x 1-3/8" TR
2
9345002
Washer Flat SAE 1/2"
4
9443092-TR
Nut Barrel 3/8" x 2" BH
2
Step 3
Insert legs into footing holes and attach Zig Zag
Steel Net Wall to collars as shown in Figure 1.1.
(See Note A)
Figure 1.1
Step 4
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE" section
of the Installation Manual.
Step 5
Plumb and level entire component. Pour concrete into
footing hole. Allow at least 72 hours to cure before
using this equipment. (See Note B)
Step 6
Place appropriate compliant protective surfacing under
and around Zig Zag Steel Net Wall. (See Note D)
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
BLOCK
BOTTOM
Shoulder Bolt
3/8" x 2-1/2"
Washer
1/2" SAE
Washer
1/2" SAE
Barrel Nut
3/8" x 2"
WALL
STEEL NET
BLOCK TOP
MOUNTING
ZIG ZAG
MOUNTING
1/4" x 1-3/8" TR
Socket Head Screw
