www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
TRANSITION WALL
INSTALLATION INSTRUCTIONS
Rev J
8/19/2020
1310
Page 2 of 3
3/8" Lock Nut
3/8" x 1" O.D. Washer
3/8" x 1-1/4"
Button Head Bolt
3/8" x 1" O.D.
Washer
Figure 1.1
See Table
FRONT ELEVATION
Figure 1.2
TRANSITION
WALL
SOCKET CLAMP
ASSEMBLY
Step 1
Locate and attach collars to posts at height shown in
Front Elevation. (See Note B)
* Height shown from top of deck to top of collar.
Step 3
Attach Transition Wall to posts using Socket Clamps
as shown in Figure 1.2. (See Note B)
Step 4
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 2
Place Transition Wall Tabs into Deck slots and loosely
attach hardware as shown in Figure 1.1. (See Note A)
COLLAR HEIGHT *
Version
Standard
Metric
1310-R35/R5
39"
991mm
1310-R5 JAPAN
45"
1143mm
