Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
SLIDE SIT DOWN HOOD
Rev A
10/10/2009
R5-1303
Page 3 of 3
Assembled Parts List
Specifications
Parts List
SLIDE SIT DOWN HOOD:
Shall be constructed of UV-stabilized, rotationally
molded, linear, low density polyethylene
with an
average wall thickness of .250".
SIT DOWN HOOD - TOP RAIL:
Shall be constructed of 1.315" O.D. 12 gauge steel
tubing. Sit Down Hood - Top Rail shall have a multi-
stage baked-on powder coat finish.
SIT DOWN HOOD GUARD SINGLE:
Shall be constructed of 1.315" O.D. 12 gauge and
1.029" O.D. 14 gauge steel tubing. Sit Down Hood
Guard shall have a multi-stage baked-on powder coat
finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Figure 1.2
Step 4
Attach Slide Sit Down Hood to Deck as
shown in Figure 1.2. (See Note A)
Step 5
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Part #
DESCRIPTION
QTY.
HS-1001-R5
Socket Clamp Set R5
2
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
2
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
4
9413002
Nut Lock 3/8"
2
Part #
DESCRIPTION
QTY.
DF-4827
Slide Hood R5
1
FS-1303-R5
Sit Down Hood Guard
2
LF-0009
Sit Down Hood - Top Rail
1
9271062-TR
Screw Tek 1/4" x 1-1/4" BH TR
7
9321052-THK
Washer Fender 1/4" x 1" OD x .125" thk
7
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
3/8" x 1"
3/8" Lock Nut
O.D. Washer
O.D. Washer
3/8" x 1"
3/8" x 1-1/4"
Button Head Bolt
