For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
MULTI-SECTION HORIZ. CRAWL TUBE
Rev D
R5-1500-3 Thru 6
Page 2 of 3
Support to Tube Section. (Refer to Section 1708 Tube
Support Orientation. Dig footing hole and attach Tube
Note A, and Note B)
section of the Installation Manual.
Step 6
Section. Refer to the Top View of your structure for Tube
under and around Horizontal Crawl Tube.
(See Note D)
Step 5
Support Assembly of the Installation Manual, Figure 1.2,
"TIGHTENING TORQUE FOR HARDWARE"
Place appropriate compliant protective surfacing
Fully tighten all fasteners according to the
Step 4
Attach Tube Sections with Tube Support as shown in
figure 1.2.
Note: Tube Support required for every second Tube
Step 3
Attach Tube Sections as shown in figure 1.1. Refer to
your structure top view for appropriate orientation.
(See Note A)
Step 2
Attach Panels to posts/decks. Refer to R5-1601
Panel - Type1 (Rotomolded) Assembly of the
Installation Manual.
Washer
3/8" Lock Nut
3/8" x 1" O.D.
Figure 1.1
3/8" x 1" O.D.
Washer
3/8" x 1-1/4" Button
Head Bolt
Figure 2
Bolt
3/8" x 1" Button Head
ROTO PANEL ROUND
Washer
3/8" x 1" O.D.
Step 1
(Factory Assembled)
Attach Tube Section to Panel as shown in Figure 2.
(See Note A)
3/8" x 1" O.D.
Washer
3/8" x 1" O.D.
Head Bolt
Figure 1.2
SECTION
STRAIGHT TUBE SUPPORT
3/8" x 1" O.D. Washer
3/8" Lock Nut
3/8" x 1" O.D. Washer
Washer
3/8" x 1-1/4" Button
3/8" x 1-1/2" Button Head Bolt
3/8" Lock Nut
CRAWL TUBE
CRAWL TUBE
SECTION
