For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
DOUBLE SIT DOWN R3.5
Rev H
7/7/2009
R3.5-1305
Page 2 of 3
BACK PANEL
3/8" x 1-1/2"
Button Head
Bolt
3/8" x 7/8"
O.D. Washer
1/2" SAE
Washer
3/8" x 5/8"
Barrel Nut
DOUBLE SIT
DOWN PANEL
FIGURE 2
Figure 1.1
DOUBLE SIT
DOWN LEG
Step 1
Attach Double Slide to deck. (See Note B)
Step 2
Attach Back Panels and Double Sit Down Legs
to Double Sit Down Panel as shown in Figure 2.
(See Note A)
Step 3
Attach collars at height shown in Side View.
(See Note B)
Step 4
Insert ends of Double Sit Down Leg into Double Slide
and attach Double Sit Down to collars as shown in
Figure 1.1. (See Note A)
Step 5
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE" section
of the Installation Manual.
SIDE VIEW
39"
Top of Deck to
Top of Collar
1/2" SAE
Washer
Barrel Nut
3/8" x 5/8"
Barrel Nut
3/8" x 2"
Bolt
Button Head
Shoulder Bolt
3/8" x 2-1/2"
DOWN BRACKET
DOUBLE SIT
3/8" x 1-3/4"
TOP
BLOCK
MOUNTING
BOTTOM
BLOCK
MOUNTING
1/4" x 1-3/8"
Screw
Socket Head
1/2" SAE
Washer
3/8" x 1"
O.D. Washer
