Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
COUNTER ASSEMBLY
Rev A
9/22/2009
1615
Page 2 of 2
HDPE PANEL
COUNTER
3/8" x 5/8"
Barrel Nut
1/2" SAE
Washer
3/8 x 1/2"
Weld Nut
3/8" x 7/8"
O.D. Washer
3/8" x 1" Button
Head Bolt
STORE PANEL
COUNTER BRACKET
3/8" x 7/8"
O.D. Washer
3/8" x 3/4"
Button Head Bolt
FIGURE 2
Parts List
Specifications
Part #
DESCRIPTION
QTY.
BE-4285
Store Panel Counter Bracket
3
Varies
HDPE Panel Counter
1
9103032-TR
Bolt Button Head 3/8" x 3/4"
3
9103052-TR
Bolt Button Head 3/8" x 1"
3
9333042
Washer Flat 3/8" x 7/8" O.D.
6
9345002
Washer Flat SAE 1/2"
3
9443022-TR
Nut Barrel 3/8" x 5/8" BH
3
9493012
3/8 x 1/2" Weld Nut
3
Step 1
Attach the HDPE Panel Counter to the Panel
as shown in Figure 2. (See Note A)
Step 2
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
HDPE PANEL COUNTER:
Shall be made from high density 3/4" thick hot
extruded polyethylene sheet plastic specially
formulated for optimum UV stability and color
retention.
STORE PANEL COUNTER BRACKET:
Shall be precision laser cut and formed from 3/16"
sheet steel. The Store Panel Counter Bracket has
a multi-stage baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
