MPS-5 User Manual
9
REMOTE CONTROL UNIT (continued)
LAYR
TIME
CLR
This toggles the layer selection for SACD discs. In
order to change the layer the player must be
stopped. This has no effect for CD’s. In order to play
audio through all channels from a SACD MCH the
default playback needs to be set to multi channel
(STOP + NEXT on front panel).
This toggles the time display during playback
between various states:
Elapsed time
Remaining time on active track
Total time on disc
Total remaining time on disc
The first time this button is pressed it will indicate the
currently selected state without changing it. If during
the next 5 seconds the button is pressed again it will
toggle to the next state.
This toggles through 2 Repeat modes:
Repeat currently playing track
Repeat entire disc
Normal playback
Numeric buttons:
Pressing any numeric button with a single digit will
locate the transport to the beginning of the chosen
track and start playback, unless the transport is in
pause mode when it will stay in pause mode.
The +10 button can be used to access tracks higher
than 9. For instance, track 23 can be accessed by
pressing:
+10
+10
3
Press and hold this button to enter the setup menu
and to display settings. See section "setup menu"
later in this manual for more details.
CDDA
SACD 2CH
SACD MCH
All manuals and user guides at all-guides.com
