Service Manual
Maintenance
Big Buck Hunter® Pro Open Season is a trademark of Play Mechanix™ Inc. All rights reserved.
Page 30
9.
If recovery does not begin, check to ensure disc is inserted correctly and is not damaged.
10.
After 30-40 minutes, check game progress.
Do not interrupt power or reset the game during recovery.
11.
A message indicates that recovery is complete.
When instructed to remove disk, open DVD-ROM drive tray and remove disk.
12.
Turn cabinet power switch off.
13.
After 30 seconds, turn cabinet power switch on.
14.
Game will reboot and enter calibration mode.
15.
Re-calibrate guns.
BIOS Settings/Power Management
N
OTICE
The PC ships with correct BIOS settings. Making changes to the BIOS different from the description below may
adversely affect game functions.
This BIOS setting lets the PC automatically power up. With the setting enabled, the PC reboots when it
detects AC power. This eliminates the need to manually turn the PC back on after power disruption.
Do
not
use the PC on/off switch. Turn AC power on or off with the cabinet power switch.
1.
Turn cabinet power switch off.
2.
Open rear of cabinet.
3.
Connect a USB keyboard to the PC.
4.
While holding the Delete key on the keyboard down, turn cabinet power switch on.
5.
When the BIOS menu screen appears, make the following adjustments.
Feature .............................................................................. Set to
Standard CMOS Feaures > Drive A .................................... [none]
Standard CMOS Features > HALT ON................................ [No Errors]
Advanced BIOS Features > Boot Sequence ....................... 1
st
CD-ROM 2
nd
Hard Disk
Advanced BIOS Features > APIC Mode ............................. Disabled
Advanced Chipset Features > Frame Buffer ..................... [16M]
Advanced Chipset Features > PMU > CPU Frequency ...... [200.0]
Power Management Setup > PWRON After PWR-Fail ...... [On]
6.
Follow instructions on screen to save and exit.
7.
PC will reset and load the game.
