14
Use all the other included net holders for the door corners and other
connections.
Cut the attached cord in half so that there are 2 short cords. Pull the cord through
each net meshes and fix it on both net hoops, if necessary lead it through the bore
in the net hoop.
Dismantling of the net is also done by rotation of the net holders through 90
degrees.
b) Fix net at the bottom of net hoops with 3 cable clips. Cut projecting parts.
4.
Storage of the goal:
To save space during storage unscrew wing nuts of the upper hinges and remove
screws. Now the net hoops can be folded.
Then screw again wing nuts and screws slightly into the 2
nd
borehole of the upper
hinges so that they don’t get lost.
5.
Ground fixing:
The ground bars are equipped with boreholes of 25 mm which serve to fix the
special anchoring systems for the goal. Different systems are available
(see
Sport-Thieme
accessories)
. The anchoring system is not part of the delivery.
The use
of the goal without corresponding anchoring system is at your own risk.
If you do not use any anchoring system close both boreholes with the supplied
caps for safety reasons. Use a mallet if necessary.
cut protecting
parts
