Platoscience PlatoWork, Manual, Page: 9 / 15

community on our website, where - as well as a discussion
forum - you will also be able to see historic usage data from the app, examine your cognitive
test results, and more.
Maintaining the headset
After each use
Take out the sponges from the headset and rinse them under lukewarm tap water. Ideally, let
them air dry first before placing them back into the plastic case. Before the next usage, they
need to be moistened with saltwater from the bottle. Doing this will help maintain the
sponges.
Charging the headset
After about 5-10 sessions, the headset will require charging. The app will
inform you when the battery is getting low. Charge the headset with the
provided USB cable only. The battery should last for more than 10
sessions, but we recommend you to charge it often so that you can ensure
your headset works when you need it and through your session.
When sponges get worn out
Your sponges can last for many (100+) sessions if treated correctly. But if
they begin to get worn out and are discoloured, you can order new sponges at cost price from
platoscience.com.
When you are out of saltwater
Follow these steps to refill:
1. Remove the screw cap, and fill the bottle with drinkable water.
2. Add 1/4 teaspoon of regular kitchen salt to the water.
3. Screw the lid back on, and shake the mixture.
Note: as little as 1/10 of a spoon, or two pinches, is sufficient, equivalent to 1 teaspoon per
litre. See more details under section
​
saltwater
​
on
​
page 6
​
.
8