Platoscience PlatoWork, Manual, Page: 12 / 15

What's in the box
Sponges
The purpose of the sponges is to ensure good contact between the headset and the skin.
●
Detach
​
: Store the sponges in the plastic casing. We recommend allowing them air dry
before placing them in the plastic case.
●
Rinse
​
: After every session, rinse the sponges under running lukewarm tap water. Before
the next usage, they need to be moistened with saltwater from the bottle.
●
Replace: If the sponges wear out (get too thin, stop retaining water, get dirty, etc.), reach
out to us at
​
hi@platoscience.com and we will arrange for replacement sponges to be sent
to you.
Bottle for saltwater
The bottle is used for containing the saltwater, which is used to soak the white electrode
sponges for ensuring a good electric conductivity between the electrodes and the scalp. More
information about saltwater and refill can be found on
​
page 8
​
.
Charging the battery with the USB cable
The USB-cable provided is used for charging the headset which runs on an internal lithium-ion
battery. This battery can last up to 10 sessions with a normal headset connection. On the
home screen of the app, you can see the battery status, and whether it is enough for one
session. If it gets too low, you can charge the device using the cable provided in the headset
case or any other standard micro USB cable. Collapse the headset, and insert the micro-USB
into the headset on the left side. The other end of the cable is a regular USB and will fit any
USB port. There is a green light indicator next to the USB when the device is charging, and the
indicator will turn off when the battery is fully charged.
The paper thin sponges
In the plastic case provided, there are three paper-thin sponges.
The case
PlatoWork is housed in a black hardshell case to protect and store the headset and its
accessories together. The casing should be sufficient for normal use.
11