Installation and user guide PLATINUM
®
inverter 5500 R3-S2, 7000 R3-S2, 8000 R3-S2, 9000 R3-S2
2. Direct the network cable through the
screw connection and seal.
3. Feed the network cable into the housing
from below.
Incoming cable: left
Outgoing cable: right
4. Tighten the network screw connec-
tions.
B
1 2 3 4 5 6
1
(T)
PLATINUM Network EIA 485
2
2
2
A BA
5. Connect the network cables in the
inverter.
CAT-5 cable with RJ45 plug
▪
Incoming cable: socket 1
▪
Outgoing cable: socket 2
CAT-5 cable with 2 twisted wires
▪
Incoming cables:
Cable A: Terminal 2
Cable B: Terminal 1
▪
Outgoing cables:
Cable A: Terminal 4
Cable B: Terminal 3
t
Ensure that signal lines A and B are
not connected incorrectly.
18
Installation
