Platinum Access Systems PA1035, User Manual

Page: 3 / 4

enable “
EXIT
” input by setting jumper to “
EN
” position.
e. Use “ DIGITS ” jumper to select “ 4 ” or “ 5 ” digits code
operation.
f. Turn on the unit by plugging a 12V-24V DC power supply to
“ SOL/DC ” terminal.
Note : 1). “ SOL/DC ” terminal is non polarity port.
2). If solar panel is used, connect solar panel to
“ SOL/DC ” terminal.
g. Re-plug in “
BAT1
” and “
BAT2
” headers.
Fig.1 Board Connectors
3. Indicator and Mode Switch Locations
See Fig.2.
1 2 3
4 5 6
7 8 9
* 0 #
Battery
Charge Status
Status
AC ON
1 2 3
PROG
NORM
ERAS
Mode SW
Battery
Charge Port
BAT1, BAT2
Fig.2 Indicators
OPERATIONS
1. Program Mode
Selected by Mode SW (“ PRGM ” position), "Green” light flashes.
Program Primary Key Code: Enter 4 or 5 key Code
Program Secondary Key Code:
Enter
#
2
+
4 or 5 key Code
Program Command :
a. Control output strike duration (default 1s)
#4xx xx: 00-09s Primary control
#6xx xx: 00-09s Secondary control
b. Hold open code
#3xxxxx xxxxx: 5 digit code (00000-99999)
2. Normal Mode
Selected by Mode SW (“ NORM ” position).
a. To open primary gate, enter 4 or 5 key code.
b. To open secondary gate, enter #2 + 4 or 5 key code.
c. To hold open, enter #3xxxxx. xxxxx: 5 digit code
(00000-99999)
d. To release hold open, enter #3xxxxx again.