11
10
1
2
ADJUSTING FIT
1. Adjust headband to fit.
2. Rotate voice tube or noise-canceling microphone until it is pointed towards your chin.
MAKING/ANSWERING/
ENDING CALLS
1
2
Without Handset lifter
To make a call:
1. Take your handset off-hook. Dial tone should sound through handset (if not, check
compatibility—see page 13).
2. Press the call control button on the headset, then dial using the telephone keypad.
To answer a call:
1. Take the handset off-hook.
2. Press the call control button on the headset to answer a call.
To end a call, press the call control button on the headset, then hang up the handset.
If either you or the recipient have trouble hearing, please check compatibility (page 13).
NOTE: Depending on
preference, you can
replace the pre-installed
leatherette ear cushions
with the alternative foam
cushions included.
MULTI-SHIFT PAIRING
2
1
OR
OR
OR
Enable
Disable
1. To pair another headset to the same base, you must first enable the multi-shift
pairing feature. Long press (3 sec.) the speaking volume minor adjust
up
button on
back of base.
2. Place a charged headset in charging cradle and red indicator light on base will
flash. Within 10 seconds of doing so, press either the "
+
" or "
-
" listening volume
button for 3 seconds until the talk indicator lights to indicate successful pairing.
NOTE: Only the last paired headset will work with the base.
To disable the multi-shift pairing feature, long press (3 sec.) the speaking volume
minor adjust
down
button.
