3
Back
Outside
VOYAGER
™
510S SYSTEM DIAGRAMS &
CONNECTING YOUR BASE
Power/mute
button
Eartip
Listen volume
/–
buttons
Horizontal
boom adjust
Charge connection
Status indicator light
(red/blue)
AC adapter
Call control button
Microphone
CONNECTING YOUR VOYAGER 510S BASE
1.
Connect telephone receiver cord to receiver
jack in the Voyager 510S Bluetooth
®
Headset
System base (referred to as “base“ from this
point on).
Note:
The access to the receiver jack
is fairly small.
2.
Connect AC adapter to adapter jack in base;
plug adapter into wall socket. Red power
indicator on base will go on.
3.
Connect telephone cord at rear of
base to telephone receiver jack in
telephone’s base.
