Plantronics Habitat PWF105-C, Manual, Page: 18 / 33

Habitat.Plantronics.com
Plantronics.com/habitat ‐ support
Pump Disclaimer and Troubleshooting Oase 2600
Pump Disclaimer
Bluworld products are comprised of high ‐ performance pump(s) which have been specified for each individual water
feature. These pump(s) are typically sealed within the system but can be removed for service or replacement if required.
Removing, replacing or tampering with the pump motors beyond regular maintenance and trouble ‐ shooting will void the
warranty. Refer to manufacturer information later in this manual for more details.
Safety Instructions (S 1)

Check that the electrical data of the power supply network and that on the type plate coincide.

Only connect the pump to a grounded power outlet (GFI) in accordance with the valid local or national electrical
codes (NEC, UL, CSA, IEC...). Contact a qualified electrician with any questions.

Do not use additional components, extension or connection cables or adapters, which are not grounded.

Remove the power cable from the electrical socket prior to handling the pump.
Note! In the event of a fault, a maximum of 10 switch ‐ on/off cycles are carried out. Should this prove unsuccessful, the pump
will switch off after approx. 40 seconds. Remove the power plug from the electrical socket and clean pump if necessary.

Never carry or pull the pump by the power cord.

Always keep the connection points (power plug) dry.

Do not operate the pump if cable or casing shows any signs of damage.

Lay the connection cable such that it is protected against possible damage.

To avoid potentially dangerous situations, only the manufacturer is allowed to make repairs or cable replacements.