11
10
ADJUSTING FIT
MULTI-SHIFT PAIRING
2
1
Enable
Disable
O
R
OR
OR
1. Slide the headset over and behind your ear.
2. Rotate and press gently towards your ear for a snug fit.
3. Rotate voice tube or noise-canceling microphone until it is pointed
towards your chin.
2
3
1
1. To pair another headset to the same base, you must first enable the multi-shift
pairing feature. Long press (3 sec.) the speaking volume minor adjust
up
button on
back of base.
2. Place a charged headset in charging cradle and red indicator light on base will flash
if the multi-shift pairing feature is enabled. Within 10 seconds of doing so, press
either the "
+
" or "
-
" listening volume button for 3 seconds until the green talk
indicator lights to indicate pairing mode, and goes out after successful pairing.
Repeat steps 1 and 2 if headset and base do not link when call control button
is pressed.
NOTE: Only the last paired headset will work with the base.
To disable the multi-shift pairing feature, long press (3 sec.) the speaking volume
minor adjust
down
button.
