SECTION 4
Testing your PTV16C
We recommend you read through this manual completely before operating your kit –
especially page 10 which deals with issues regarding radio transmitter interference.
To make your PTV16C kit operational:
1. Carefully remove the PTV16C from its protective shipping packaging and set it on your
table. Your kit is as lightweight as we could make it so that it can be flown in our
Tri-Turbofan powered Remote Controlled Blimp. The PTV16C is encased in a copper
shield which isolates the circuitry from inductance interference. The Copper shield also
functions as a ground plane antenna. Examine
Figure 4.0
and familiarize yourself with
the key components highlighted here:
1. CCD Camera Lens
2. Power ON indicator LED
3. On/Off Switch
4. Copper Ground Plane Antenna
5. 9 Volt Battery Connector
6. Main Antenna
4
Figure 4.0
Summary of Contents for PTV16C
Page 1: ......