manualshive.com logo in svg

Planmeca Viso G7, User Manual, Page: 76 / 86

Share
Download
Planmeca Viso G7 User Manual Download Page 76

15  Cleaning and disinfection

NOTE

Switch the X-ray unit off before cleaning and disinfection.

NOTE

Use a Planmeca approved cleaning agent and surface disinfectant. The

products are categorised here as cleaning agents and / or disinfectants

according to the information provided by the manufacturers.

NOTE

Follow the instructions provided by the manufacturer of the cleaning agent,

disinfectant and autoclave.

NOTE

FOR SPRAYS, LIQUIDS AND FOAMS:
Do not apply sprays, liquids or foams directly on the surfaces. Apply

sparingly to a clean soft cloth and wipe the surface with the cloth.
Contact your service technician for help if sprays, liquids or foams enter the

system.

Planmeca approved cleaning agents

Manufacturer

Brand name

Alpro Medical

CleanWipes

Alpro Medical

IC-100

Alpro Medical

MinutenSpray-classic

Clinell

Clinell Universal Wipes

Clinitex

R515 Detergent Multi-Surface Wipes

Ecolab

Actichlor Plus

SciCan

Optim Blue Wipes

Planmeca approved surface disinfectants

Manufacturer

Brand name

Alpro Medical

MinutenSpray-classic

Antibac

Antibac 75%

CCS HealthCare

Dax Extra

CCS HealthCare

Dax 70+

Chemi-Pharm AS / Plandent

Orbis Surface Disinfectant

Clinell

Clinell Universal Wipes

Ecolab

Actichlor Plus

SciCan

Optim Blue Wipes

15  Cleaning and disinfection

70 Planmeca Viso G7

User's manual

Summary of Contents for Viso G7























































































Reviews:

No comments