Clamp a tool (if not yet in spindle) and measure it.
Open the Edit tool where you can change the tool and adjust
its service life.
Delete Assignment from this tool station.
13.4.3 Tool information
The
Tool information field displays which tool type is currently clamped in
the machining spindle and gives information on the tool's service life and
condition.
13.5 Settings menu
13.5.1 Move to positions
The
Move to positions menu is always available at the bottom of the touch
screen when you are in the
Settings menu. You can drive the machine into
different working positions by pressing the corresponding button.
When you switch on the milling unit, it is in the home
position.
The machine is easier to clean when it is in the
cleaning position.
The blank position is a position for loading the
workpiece holder.
The blank position is a position for loading the
workpiece holder.
The collet position is a position for cleaning the collet.
13 Control software
44 Planmeca PlanMill 60 S
User's manual
